🔬
Resistance to Wear
DIN EN 14354, Part D
Class 31
Tested using Taber Abraser 5155 with Taber Grit Feeder Model Nr. 255 and Aluminium Oxide 240 grit. Achieved classification class 31 in lab conditions — suitable for moderate commercial wear applications.
☀️
Artificial Weathering (UV)
EN ISO 16474-3, Cycle 1
No Change at 3000h
Tested using Atlas UV Test equipment. After 3000 hours of continuous UV cycle exposure, no observable change to the surface was recorded. The tested print finish maintains colour fidelity and surface integrity under extended UV conditions.
👟
Slip Resistance of Floors
DIN EN 16165, Part B
Testing in Progress
Testing methodology: inclined plane with an 80kg person wearing shoes. Formal slip resistance certification testing is currently in progress. Results will be published on confirmation. Contact us for current status on specific substrates.
⚡
Impact — Small Ball
EN 438-2, Wegner Impact Tester
> 60N
Tested with Wegner impact tester using 5mm steel ball. All tested samples exceeded 60N — the maximum measurement capacity of the testing equipment. No damage, cracks, or surface failure at maximum machine rating.
🎱
Impact — Large Ball
EN 438-2, Large Ball Method
> 2.0m Drop
Tested using a polished steel ball (324g ±5g, diameter 42.8mm ±0.2mm). Drops from above 2.0m produced no visible impact, damage, or cracking on tested surface samples. Maximum test height achieved without failure.
✏️
Scratch Resistance
DIN 55656, TQC SHEEN
> 15 kN
Tested using TQC SHEEN Hardness Test (0–300 scale). Sample designations No.1 and No.3 achieved scratch resistance exceeding 15 kN — demonstrating strong resistance to surface scratching under applied force.
🖊️
Coating Hardness
EN 15184, Pencil Hardness
6H
Tested using TQC SHEEN Pencil Hardness Test. All sample designations (No.1, No.2, No.3, No.4) achieved a pencil hardness rating of 6H — the highest standard category, indicating an extremely hard coating with excellent resistance to surface penetration.
📋
Need Full Technical Specs?
We can provide detailed test documentation, sample specifications, and substrate-specific data on request.
Contact Us →
